* citra-qt config: small misc changes
Remove unused ReadSettingGlobal
Remove unused WriteSetting overload
ReadGlobalSetting: rename default value variable
* qt config: fix u16 values being written as QMetaType
* qt config: rework post processing shader setting
handles post processing setting properly when per-game settings are used.
the anaglyph shader is given its own setting, separate from the post
processing name.
* qt config: use u32 instead of unsigned int when casting
The 3D toggle does not behave correctly as it does not have some
special logic from the enhancements configuration UI that determines
the post-processing shader defaults to use. Because of that, plus
an uptick in people seemingly accidentally enabling 3D options and
not being sure why Citra is rendering differently, just remove the
new UI components for now until better ideas for 3D control can
be worked out.
* apt: Implement additional library applet state management.
* kernel: Clear process handle table on exit.
* apt: Implement system applet commands.
* apt: Pop MediaType from command buffers with correct size.
* apt: Improve accuracy of parameters and HLE applet lifecycle.
* apt: General cleanup.
* file_sys: Make system save data open error code more correct.
Not sure if this is the exact right error code, but it's at least
more correct than before as Game Notes will now create its system
save data instead of throwing a fatal error.
* apt: Fix launching New 3DS Internet Browser.
* frd: Correct fix to GetMyScreenName response.
Qt isn't always writing changes on save. This causes config to be lost on crash. This PR ensures all changes are always saved on the file.
Ported from yuzu.
Co-authored-by: Narr the Reg <5944268+german77@users.noreply.github.com>
* Get value for swap screen setting and check mono_render_option again
* resolve clang-format issue
* do not disable opengl blending since it is enabled by default
* reset blending state to default values after drawing second screen
* prevent resetting state blending when custom opacity is not used
* Services/APT: Implemented PrepareToStartApplication and StartApplication.
This allows games to be launched from the Home Menu, however, there is still a bug with the GSP where the Home Menu doesn't release the GPU rights. It is unknown if the Home Menu should terminate itself after launching a new application.
To get the Home Menu to not hang when launching stuff, you need to have config block 0xF0006 (size 40 flags 8) in your config savegame, it doesn't matter if it's filled with zeros.
* Services/APT: Implement WakeupApplication.
With this, the Home Menu is now able to launch games when using an LLE NIM imlementation.
* Services/APT: Reset the app_start_parameters after launching the application with StartApplication.
* Services/APT: Simplify the StartApplication code by directly calling WakeupApplication.
---------
Co-authored-by: Subv <subv2112@gmail.com>
It seems like the menu isn't showing up for users on Android 13.
We're not sure what's wrong, and the approach we've been using for the
menu hasn't been entirely reliable in the past either (in particular
not on non-mobile form factors like Chromebooks and VR devices),
so let's make it possible to open the menu by pressing Back,
an action that works reliably on most kinds of Android devices.
(Not sure if there's an equivalent of Back on devices like watches,
but I think we can pretty safely ignore those for now.)
* This fixes#6041 by changing OnCoreError. Instead of there being an "Abort/Continue" prompt when a savestate fails to save or load, it just brings up a warning box.
I also changed "Abort/Continue" to "Quit Game/Continue" for better clarity
* Fixed formatting
This prevents the keyboard from being stuck in an open state if the user
slides the panel while focused on a text box. Now it closes gracefully.
Co-authored-by: Charles Lombardo <clombardo169@gmail.com>
... In Qt 5.15+ the QImage will not accept non-natively handled pixel
formats anymore. We can however use the newly added conversion method
provided in `QVideoFrame` to convert it to `QImage` instead
* Initial plugin loader support
* More plugin loader progress
* Organize code and more plugin features
* Fix clang-format
* Fix compilation and add android gui
* Fix clang-format
* Fix macos build
* Fix copy-paste bug and clang-format
* More merge fixes
* Make suggestions
* Move global variable to static member
* Fix typo
* Apply suggestions
* Proper initialization order
* Allocate plugin memory from SYSTEM instead of APPLICATION
* Do not mark free pages as RWX
* Fix plugins in old 3DS mode.
* Implement KernelSetState and notif 0x203
* Apply changes
* Remove unused variable
* Fix dynarmic commit
* Sublicense files with MIT License
* Remove non-ascii characters from license
* common: Move settings to common from core.
- Removes a dependency on core and input_common from common.
* code: Wrap settings values
* Port from yuzu to allow per game settings
* citra_qt: Initial per-game settings dialog
* citra_qt: Use new API for read/save of config values
* citra_qt: Per game audio settings
* citra_qt: Per game graphics settings
* citra_qt: Per game system settings
* citra_qt: Per game general settings
* citra_qt: Document and run clang format
* citra_qt: Make icon smaller and centered
* citra_qt: Remove version number
* Not sure how to extract that, can always add it back later
* citra_qt: Wrap UISettings
* citra_qt: Fix unthottled fps setting
* citra_qt: Remove margin in emulation tab
* citra_qt: Implement some suggestions
* Bring back speed switch hotkey
* Allow configuration when game is running
* Rename/adjust UI stuff
* citra_qt: Fix build with separate windows
* citra_qt: Address feedback
* citra_qt: Log per-game settings before launching games
* citra_qt: Add shader cache options
* Also fix android build
* citra_qt: Add DLC menu option
* citra_qt: Run clang-format
* citra_qt: Adjust for time offset
* citra_qt: Implement suggestions
* Run clang-format
Co-authored-by: bunnei <bunneidev@gmail.com>
* Add setting for system time offset
Add a setting to displace citra system time by days, hours, minutes
or seconds
Add UI for the setting which is only visible when clock is set to
system time
Change core/settings.h to include the setting
* Add system time offset to kernel
Actually makes use of the time offset.
* Fix time offset calculatioon in core/movie.cpp
* Replace C++20 chrono::days with seconds
Hopefully fixes the build.
* Fix socket poll and handling in windows
* Fix clang
* Add guest timing adjust
* Use platform independent time fetch
* Use proper type in time_point
* Fix ambiguous function call
* Do suggestions
* Take cpu_clock_scale into account in tick adjust
xbyak is intended to be installed in /usr/local/include/xbyak.
Since we desire not to install xbyak before using it, we copy the headers
to the appropriate directory structure and use that instead
Co-authored-by: merry <git@mary.rs>
previous changes had forced every single user to use custom
directories for NAND and SDMC. Those paths were saved to the
config file and would interact badly with portable builds.
Games will sometimes use these when representing open right bounds
and so disallowing it caused regressions, with a notable example
being when MemoryFill is called to the end of vram, causing an
"invalid end address" error.
This had been noted on a comment in GetPhysicalRef prior to the
regression.
Reported by GillianMC on Discord. Looks to be a small quirk in the QT API.
setText(QObject::tr(status.text));
bringing up QObject breaks the link with the GameListItemCompat
If a shutdown was requested by the application, close the SDL window,
initiating the normal shutdown procedure. This causes a graceful exit
process instead of hanging.
* AMDs new driver fixed many issues in the OpenGL driver. No reason to
keep these hacks. In addition the upgrade to 4.3 guarantees the
existance of required extensions, so no need to check for them
* The current backend heavily depends on many extensions for shadow
rendering and texture cubes in the fragment shaders. All these
extensions were incorporated to core in 4.3. Support is practically
ubiquitous and requiring support for it makes things a lot easier
* This commit aims to both continue the rasterizer cache cleanup by
separating CachedSurface into a dedicated header and to start weeding
out the raw OpenGL code from the cache.
* The latter is achieved by abstracting most texture operations in a new
class called TextureRuntime. This has many benefits such as making it easier
to port the functionality to other graphics APIs and the removal of the need
to pass (read/draw) framebuffer handles everywhere. The filterer and
reinterpreter get their own sets of FBOs due to this, something that
might be a performance win since it reduces the state switching
overhead on the runtime FBOs.
The JNI functions that have "UTF" their name use "modified UTF-8"
rather than the standard UTF-8 that Citra uses, at least according
to Oracle's documentation, so it is incorrect for us to use them.
This change fixes the problem by converting between UTF-8 and
UTF-16 manually instead of letting JNI do it for us.
Resolves#6077
If only `SDL_INIT_JOYSTICK` is used, `InputCommon::SDL::SDLState` later tries to initialize the game controller in a background thread, which on macOS causes a crash in `SDL_PumpEvents`. From [the SDL docs](https://wiki.libsdl.org/SDL_Init), `SDL_INIT_GAMECONTROLLER` implies `SDL_INIT_JOYSTICK`, so this should be a total superset of the previous behavior.
The Controller config UI exposes the Circle mod, only for the Circle pad's modifier, So after changing the binding, it leaves the default binding for the c-stick untouched, and the user is nagged about the (default) D key being bound to something, when trying to bind it to any other button.
With this PR we update the modifier for both the Circle Pad and C-stick.
* Convert Input Count to Frame Count
While recording or playing a movie file, the left side of the status bar currently displays an input counter which shows how many times the emulator has polled for button inputs during the movie. This information is far less easily understandable and less useful for TASing compared to a frame count. The frame count has a linear relationship with input count that can be expressed with Frame Count = 0.255689103308912 * Input Count. Simply put, instead of having a counter that goes up by 3 or 4 every frame, this makes it a counter that goes up by exactly 1 every frame.
* Update movie.cpp
* Update movie.cpp
* Fixing clang-format errors
* Update movie.cpp
Did not realize that the frame rate was defined as a constant somewhere in the source code. This makes this conversion far less sketchy.
* Update movie.cpp
* In older `httplib`, SSL connections were not handled correctly and
will have issues with proxy servers. Also, keep alive directives were
not available back then, which is probably necessary to implement
HTTP_C service correctly.
* Another reason being `httplib` now requires OpenSSL 1.1+ API while
LibreSSL 2.x provided OpenSSL 1.0 compatible API.
* The bundled LibreSSL has been updated to 3.2.2 so it now provides
OpenSSL 1.1 compatible API now.
* Also the path hint has been added so that it will find the correct
path to the CA certs on *nix systems.
* An option is provided so that *nix system distributions/providers can
use their own SSL implementations when compiling Yuzu/Citra to
(hopefully) complies with their maintenance guidelines.
* LURLParse is also removed since `httplib` can handle
`scheme:host:port` string itself now.
video_core: disable depth/stencil texture download on OpenGL ES
Disable deptch stencil shader in texture_downloader_es for now
enable_depth_stencil
DepthStencil
remove GL_DEBUG_OUTPUT_SYNCHRONOUS
So that it is destructed first. Otherwise, the TimeStretcher will be destructed before the Sink, which might cause segfaults when the Sink tries to read data from the TimeStretcher afterwards.
When the vector is empty, using `&vec[0]` involves undefined behaviour. While that works fine most of the time, Flatpak builds aborted on a failed `__builtin_expect`.
I searched for such occurences across the codebase with the regex `(?<!&)&\w+\[0\]` and fixed those that would potentially cause issues.
* Corrected the path to the headbar icon
Corrected the path where the icon file is located, since the "dist" folder is located next to the binary provided in github.
* Corrected the path to the headbar icon
Corrected the path where the icon file is located, since the "dist" folder is located next to the binary provided in github.
* renderer_opengl.cpp: fix sanitize_mul check for disk shader cache
* Partially revert "Band-aid solution for 'Disk Shader Cache' (#5188)"
This reverts commit 2e0ce86c9e.
* Disable `disk_shader_cache` checkbox when `hw_renderer` is off
Starting from macOS 10.14, users need to grant permissions for applications to use media capture (camera and microphone).
The application *must* provide a description in its Info.plist or it will be terminated due to privacy violation upon attempting to initialize camera/microphone.
Ideally these two strings should be translated, but since this is not really compatible with Qt's localization system and likely requires separate configuration, I'm currently not that interested in messing with it.
Implements the auto map functionality for the GC adapter.
The controls map nicely to the original 3ds controls, with the select button being mapped to the Z button on GC.
The ZL/ZR buttons are not mapped by this feature.
Streamlines the code and introduces fixes for the origin status of the controller along with adapter hotplug support
Co-Authored-By: Narr the Reg <5944268+german77@users.noreply.github.com>
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
This is a port of the initial GameCube adapter input support i added into yuzu emulator.
It requires the same setup as when it was first introduced in yuzu, requiring the Zadig driver be installed for the adapter to allow it to interface with libusb.
Previously the movie was started *after* core starts running, causing potential indeterminism.
Some desyncs are still not fixed; they may be caused by core timing. More investigation is required.
Since we do not have an overlay yet, it can be confusing whether movie is being recorded or played. This makes it clear.
Status messages (e.g. system archive missing) will be overriden, but that shouldn't be too important when recording movies.
Doubled the status bar updating frequency to provide a better experience. It now updates every second.
This is completely rebuilt, in order to allow setting author, displaying movie metadata, and toggling read-only mode.
The UX is changed to more closely match other emulators' behaviour. Now you can only record/play from start/reset (In the future, we might want to introduce 'record from savestate')
Also fixed a critical bug where movie file can be corrupted when ending the recording while game is still running.
Instead of specifying it when starting playback. This is necessary as
you can end up playing the movie even if you started as Recording
(for example, loading a state in R/O mode will switch to Playing mode)
Most other emulators handle this automatically in the frontend,
booting/restarting the corresponding game instead of reporting an error.
Therefore, remove these checks and errors from the module.
These fields are included in most emulators and required by TASVideos.
`input_count` is implemented by counting the number of 'PadAndCircle' states, as this is always polled regularly and can act as a time/length indicator.
TASVideos also require the input count/frame count to be verified by the emulator before playback, which is also implemented in this commit.
The read-only mode switch affects how movies interact with savestates after you start a movie playback and load a savestate. When you are in read-only mode, the movie will resume playing from the loaded savestate. When you are in read+write mode however, your input will be recorded over the original movie ('rerecording'). If you wish to start rerecording immediately, you should switch to R+W mode, save a state and then load it.
To make this more user-friendly, I also added a unique ID to the movies, which allows each movie to have an individual set of savestate slots (plus another set for when not doing any movies). This is as recommended by staff at TASVideos.
Allocating new textures has fairly high driver overhead.
We can avoid some of this by reusing the textures from destroyed surfaces since the game will probably create more textures with the same dimensions and format.
Some games (e.g. Pilotwings Resort) create many surfaces that are invalidated quickly but were never removed.
This occasionally lead to large lag spikes due to high lookup times and other data structure management overhead.
Given this is a central class, we should flag cases where the return
value of some functions not being used is likely a bug.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
setMargin() has been deprecated since Qt 5, and replaced with
setContentsMargins(). We can move over to setContentsMargins() to stay
forward-compatible with Qt 6.0.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
I made a request on the Xbyak issue tracker to allow some constructors
to be constexpr in order to avoid static constructors from needing to
execute for some of our register constants.
This request was implemented, so this updates Xbyak so that we can make
use of it.
Previously core itself was the library containing the code to gather
common information (build info, CPU info, and OS info), however all of
this isn't core-dependent and can be moved to the common code and use
the common interfaces. We can then just call those functions from the
core instead.
This will allow replacing our CPU detection with Xbyak's which has
better detection facilities than ours. It also keeps more
architecture-dependent code in common instead of core.
Saves UISettings and Settings when booting a guest. Moves updating
UISettings::values from GMainWindow::closeEvent into its own function,
then reuses it in GMainWindow::BootGame.
Co-Authored-By: lat9nq <22451773+lat9nq@users.noreply.github.com>
* Look at direction of analog axis travel instead of instantaneous sample
* Clang-format
* Use map count, use unordered_map
* Improve digital vs. true analog axis heuristics
* Implement the basics of controller auto mapping. From testing doesn't currenlty work.
Opening the controller requires the device index, but it is only known and guaranteed
at boot time or when a controller is connected.
* Use the SDL_INIT_GAMECONTROLLER flag to initialize the controller
subsystem. It automatically initializes the joystick subsystem too,
so SDL_INIT_JOYSTICK is not needed.
* Implement the SDLGameController class to handle open game controllers.
Based on the SDLJoystick implementation.
* Address review comments
* Changes SDLJoystick and SDLGameController to use a custom default
constructible destructor, to improve readability. The only deleters
used previously were SDL_JoystickClose and SDL_GameControllerClose,
respectively, plus null lambdas. Given that both SDL functions
accept null pointers with just an early return, this should be
functionally the same.
with just an early return
* warn the user when a controller mapping is not found
* Get axis direction and threshold from SDL_ExtendedGameControllerBind
* Reject analog bind if it's not axis, for the couple of examples present in SDL2.0.10's db.
Also add SDL_CONTROLLER_BINDTYPE_NONE for the button bind switch, with a better log message.
* sdl_impl.cpp: Log the error returned by SDL_GetError upon failure to open joystick
* sdl: only use extended binding on SDL2.0.6 and up
* sdl_impl.cpp: minor changes
Follows the video core PR. fmt doesn't require casts for enum classes
anymore, so we can remove quite a few casts.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
fmt now automatically prints the numeric value of an enum class member by default, so we don't need to use casts any more.
Reduces the line noise in our code a bit.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Conversions from void* to the proper data type are well-defined and
supported by static_cast. We don't need to use reinterpret_cast here.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
* game_list: Eliminate redundant argument copies
Several functions can be taken by const reference to avoid copies
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
* game_list: Make game list function naming consistent
Makes the naming consistent with the rest of the functions that are
present.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: Lioncash <mathew1800@gmail.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
The current inconsistency can result in a developer unintentionally
creating a crash when using UNIMPLEMENTED_MSG, if they're only
familiar with UNIMPLEMENTED. The two macros shouldn't have such
wildly different behaviors.
The feature wasn't working when the "single window mode" was off.
Changed the cursor setting to only affect the render_window and
moved to a signal/slot model to show the mouse.
* service/apt: Add GetModule and GetAppletManager
These will be used to retrieve and set deliver args across system resets (which are currently implemented as complete restarts)
* applet_manager: Implement DeliverArg
`flags` was added to `ApplicationJumpParameters` as flags 0x2 is handled differently from 0x0.
* service/apt: Add ReceiveDeliverArg, implement GetStartupArgument
Some based on guesses.
* Address review comments
* kernel/thread: Change owner_process to std::weak_ptr
Previously this leaked almost all kernel objects. In short, Threads own Processes which own HandleTables which own maps of Objects which include Threads.
Changing this to weak_ptr at least got the camera interfaces to destruct properly. Did not really check the other objects though, and I think there are probably more leaks.
* hle/kernel: Lock certain objects while deserializing
When deserializing other kernel objects, these objects (`MemoryRegion`s and `VMManager`s) can possibly get modified. To avoid inconsistent state caused by destructor side-effects, we may as well simply lock them until loading is fully completed.
* Fix silly typo
Somehow this didn't break?!
* Enable 'Accurate Multiplication' by default.
* Move 'Disk Shader Cache' to the 'Advanced' tab
* Prevent enabling 'Disk Shader Cache' when 'Enable Hardware Shader' or 'Accurate Multiplication' is disabled.
* Do not load 'Disk Shader Cache' when 'Accurate Multiplication' is disabled.
* Add a tooltip for 'Disk Shader Cache'.
Allows some implementations to avoid completely zeroing out the internal
buffer of the optional, and instead only set the validity byte within
the structure.
This also makes it consistent how we return empty optionals.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
* Forward declare ui and use unique_ptr
* ConfigureEnhancements: use unique_ptr for ui
* Use make_unique instead of new where applicable
* Move some of the ui includes that already used unique_ptr
* main.cpp: also make use of make_unique on Config
* Address review comments
The deep recursion has caused issues in certain games with large numbers of files, especially with MSVC builds.
Previously the recursion depth is about equal to the number of files present. With this the depth should be about equal to the maximum depth of the directory structure of the RomFS.
Consistency change with how we mark constants in the rest of the
codebase.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
The list of points is returned by const reference, so we don't need to
make a copy of every element in the list.
Co-authored-by: Lioncash <mathew1800@gmail.com>
- In `SetCurrentThreadName`, when on Linux, truncate to 15 bytes, as (at
least on glibc) `pthread_set_name_np` will otherwise return `ERANGE` and
do nothing.
- Also, add logging in case `pthread_set_name_np` returns an error
anyway. This is Linux-specific, as the Apple and BSD versions of
`pthread_set_name_np return `void`.
- Change the name for CPU threads in multi-core mode from
"yuzu:CoreCPUThread_N" (19 bytes) to "yuzu:CPUCore_N" (14 bytes) so it
fits into the Linux limit. Some other thread names are also cut off,
but I didn't bother addressing them as you can guess them from the
truncated versions. For a CPU thread, truncation means you can't see
which core it is!
The general pattern is to mark mutexes as mutable when it comes to
matters of constness, given the mutex acts as a transient member of a
data structure.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
These are intentionally discarded internally, since the rest of the
public API allows querying success. We want all non-internal uses of
these functions to be explicitly checked, so we can signify that we
intentionally want to discard the return values here.
The settings.h file doesn't actually need all of the definitions
on cam.h, only some of the enums. They can, therefore, be separated
into another file, which is included by settings.h instead.
The other changes are fixing files that included settings.h and
depended on indirect includes from includes of includes of cam.h
In all usages of LogSetting(), string literals are provided.
std::string_view is better suited here, as we won't churn a bunch of
string allocations every time the settings are logged out.
While we're at it, we can fold LogSetting() into LogSettings(), given
it's only ever used there.
Co-Authored-By: Mat M. <lioncash@users.noreply.github.com>
In cases where the size is not a known constant when inlining, AlignUp<std::size_t> currently generates two 64-bit div instructions.
This generates one div and a cmov which is significantly cheaper.
Some of the classes in this file already do this, so we can apply this
to the other ones to be consistent.
Allows these classes to play nicely and not churn copies when used with
standard containers or any other API that makes use of
std::move_if_noexcept.
* Change "Toggle Speed Limit" to toggle between 100% and a custom value
This will change the shortcut for "Toggle Speed Limit" to make it swap between 100% and the value of "Limit Speed Percent" in the config. Old functionality is still there, but renamed to "Unthrottle".
* Complete reimplementation of the function
* Fix something that didn't get saved correctly
* Fix missing indentation
* Rewrite to keep only a single QSpinBox
* Second rewrite
* set Unthrottled to 0 in the Qspinbox
* Hotkey for Unthrottle
* minor improvements to the design
* Apply suggestions from code review
Co-authored-by: Ben <bene_thomas@web.de>
* Default slider values
* clang-format fixes
* Prevent the speed slider from changing size
...when an element in its row has variable width.
* Change "Game Speed" to "Emulation Speed"
* Apply suggestions from code review
`game_speed` to` emulation_speed`
Co-authored-by: Valentin Vanelslande <vvanelslandedev@gmail.com>
* Fix for QSliders
* Revert "Prevent the speed slider from changing size"
This reverts commit ddaca20044.
* clang-format
...doesn't seem to stick to a choice
* Fix 2 for QSliders
Co-authored-by: B3n30 <benediktthomas@gmail.com>
Co-authored-by: Ben <bene_thomas@web.de>
Co-authored-by: Valentin Vanelslande <vvanelslandedev@gmail.com>
We can adjust the API to allow std::size_t indices, which simplifies
operating with standard container types. It also prevents truncation
warnings from occurring in these cases as well.
* archive: Make use of std::pair for OpenFileFromArchive
The tuple only makes use of two elements, so we can use a pair to
simplify the number of underlying template instantiations that need to
be done, while also simplifying the surrounding code.
* archive: Simplify MakeResult calls
MakeResult can deduce the contained result type based off the type of
the variable being passed to it, so explicitly specifying it is a little
verbose.
* Avoid deadlock when stopping video dumping
* Use static_cast, make quit atomic
* One more atomic load
* Use suggested lock instead of atomic
* Fix locking
While we're at it, we can also improve some of the allocations and
copying that would be going on in one case by preallocating and then
emplacing before modifying.
This might be caused by some packet/status delay within the enet protocol, or may be caused by our not properly handling disconnection. Anyway, this situation *can* happen, and we should not crash Citra for a non-critical error.
This change is not HW tested as I do not have 3 3DSes, but this should make sure that all the members of the network hold the same `node_info`, `nodes` and the bitmasks, etc.
Previously, when connecting, the host was using the incorrect node_id to update `node_info`.
This is an attempt to fix tywald's problem with MH, reported on Discord a while ago. I'm not sure if this would actually fix that though.
I'm not sure why we decided to have a boolean here, but apparently that wasn't the correct behaviour. According to HW tests, the Software Keyboard simply displays the default text when the button text provided is empty (**not necessarily all zero**). For example, if you set a text for one of the buttons and leave others empty, the button you set will have your text, while others will have their default texts. Removed the boolean and updated frontend code to make it correct.
* gl_rasterizer_cache: Mark file-scope functions as static where applicable
Prevents -Wmissing-declaration warnings from occurring and also makes
these functions internally linked.
* gl_rasterizer_cache: Remove unused local std::string variable
Despite being unused, compilers are unable to completely remove any code
gen related to the construction and destruction of this variable, since
the destructor of std::string is non-trivial.
Thus, we can remove it to reduce a minor amount of unnecessary code
generation
* gl_rasterizer_cache: Mark hash implementation as noexcept
This shouldn't throw.
* gl_rasterizer_cache: Remove unused variable in ClearAll()
* gl_rasterizer_cache: Make use of const on references explicit
While declared as auto&, these actually behave as const auto& variables,
due to the constness of the container being iterated. We can make this
explicit for readability sake.
* gl_rasterizer_cache: Resolve truncation warnings
The size is forwarded to a std::memset call, which takes a std::size_t
as its size parameter, so we can just make this change to silence the
warnings.
* gl_rasterizer_cache: Resolve variable shadowing warnings
Prevents a -Wshadow warning from occurring.
* GUI: Deadzone controls for sdl engine at configuration input
Co-Authored-By: CJ Bok <cjbok@users.noreply.github.com>
* configure_input: Use slider to edit modifier scale
Co-Authored-By: Kewlan <kewlan@users.noreply.github.com>
* Address minor review comment
Co-Authored-By: Kewlan <kewlan@users.noreply.github.com>
Co-authored-by: CJ Bok <cjbok@users.noreply.github.com>
Co-authored-by: Kewlan <kewlan@users.noreply.github.com>
It's undefined behavior to pass a null pointer to std::fread and
std::fwrite, even if the length passed in is zero, so we must perform
the precondition checking ourselves.
A common case where this can occur is when passing in the data of an
empty std::vector and size, as an empty vector will typically have a
null internal buffer.
While we're at it, we can move the implementation out of line and add
debug checks against passing in nullptr to std::fread and std::fwrite.
