Merge pull request #706 from lioncash/unused

dyncom: Remove more unused/unnecessary code

src/core/arm/dyncom/arm_dyncom.cpp

@@ -31,7 +31,6 @@ ARM_DynCom::ARM_DynCom(PrivilegeMode initial_mode) {
 
     // Reset the core to initial state
     ARMul_Reset(state.get());
-    state->NextInstr = RESUME; // NOTE: This will be overwritten by LoadContext
     state->Emulate = RUN;
 
     // Switch to the desired privilege mode.
@@ -99,7 +98,6 @@ void ARM_DynCom::ResetContext(Core::ThreadContext& context, u32 stack_top, u32 e
     context.pc = entry_point;
     context.sp = stack_top;
     context.cpsr = 0x1F; // Usermode
-    context.mode = 8;    // Instructs dyncom CPU core to start execution as if it's "resuming" a thread.
 }
 
 void ARM_DynCom::SaveContext(Core::ThreadContext& ctx) {
@@ -113,8 +111,6 @@ void ARM_DynCom::SaveContext(Core::ThreadContext& ctx) {
 
     ctx.fpscr = state->VFP[1];
     ctx.fpexc = state->VFP[2];
-
-    ctx.mode = state->NextInstr;
 }
 
 void ARM_DynCom::LoadContext(const Core::ThreadContext& ctx) {
@@ -128,8 +124,6 @@ void ARM_DynCom::LoadContext(const Core::ThreadContext& ctx) {
 
     state->VFP[1] = ctx.fpscr;
     state->VFP[2] = ctx.fpexc;
-
-    state->NextInstr = ctx.mode;
 }
 
 void ARM_DynCom::PrepareReschedule() {

src/core/arm/interpreter/arminit.cpp

@@ -29,22 +29,8 @@ ARMul_State* ARMul_NewState(ARMul_State* state)
     memset(state, 0, sizeof(ARMul_State));
 
     state->Emulate = RUN;
-    for (unsigned int i = 0; i < 16; i++) {
-        state->Reg[i] = 0;
-        for (unsigned int j = 0; j < 7; j++)
-            state->RegBank[j][i] = 0;
-    }
-    for (unsigned int i = 0; i < 7; i++)
-        state->Spsr[i] = 0;
-
     state->Mode = USER32MODE;
 
-    state->VectorCatch = 0;
-    state->Aborted = false;
-    state->Reseted = false;
-    state->Inted = 3;
-    state->LastInted = 3;
-
     state->lateabtSig = HIGH;
     state->bigendSig = LOW;
 
@@ -129,26 +115,18 @@ void ARMul_Reset(ARMul_State* state)
 {
     VFPInit(state);
 
-    state->NextInstr = 0;
-
     state->Reg[15] = 0;
     state->Cpsr = INTBITS | SVC32MODE;
     state->Mode = SVC32MODE;
-
     state->Bank = SVCBANK;
-    FLUSHPIPE;
 
     ResetMPCoreCP15Registers(state);
 
-    state->EndCondition = 0;
-    state->ErrorCode = 0;
-
     state->NresetSig = HIGH;
     state->NfiqSig = HIGH;
     state->NirqSig = HIGH;
     state->NtransSig = (state->Mode & 3) ? HIGH : LOW;
     state->abortSig = LOW;
-    state->AbortAddr = 1;
 
     state->NumInstrs = 0;
 }

src/core/arm/skyeye_common/armdefs.h

@@ -53,14 +53,11 @@ typedef u64 ARMdword;  // must be 64 bits wide
 typedef u32 ARMword;   // must be 32 bits wide
 typedef u16 ARMhword;  // must be 16 bits wide
 typedef u8 ARMbyte;    // must be 8 bits wide
-typedef struct ARMul_State ARMul_State;
 
 #define VFP_REG_NUM 64
 struct ARMul_State
 {
     ARMword Emulate;       // To start and stop emulation
-    unsigned EndCondition; // Reason for stopping
-    unsigned ErrorCode;    // Type of illegal instruction
 
     // Order of the following register should not be modified
     ARMword Reg[16];            // The current register file
@@ -89,8 +86,6 @@ struct ARMul_State
     ARMword ExtReg[VFP_REG_NUM];
     /* ---- End of the ordered registers ---- */
 
-    ARMword RegBank[7][16]; // all the registers
-
     ARMword NFlag, ZFlag, CFlag, VFlag, IFFlags; // Dummy flags for speed
     unsigned int shifter_carry_out;
 
@@ -102,10 +97,7 @@ struct ARMul_State
     unsigned long long NumInstrs; // The number of instructions executed
     unsigned NumInstrsToExecute;
 
-    unsigned NextInstr;
-    unsigned VectorCatch;                   // Caught exception mask
-
-    unsigned NresetSig;                     // Reset the processor
+    unsigned NresetSig; // Reset the processor
     unsigned NfiqSig;
     unsigned NirqSig;
 
@@ -147,13 +139,6 @@ So, if lateabtSig=1, then it means Late Abort Model(Base Updated Abort Model)
 */
     unsigned lateabtSig;
 
-    bool Aborted;             // Sticky flag for aborts
-    bool Reseted;             // Sticky flag for Reset
-    ARMword Inted, LastInted; // Sticky flags for interrupts
-    ARMword Base;             // Extra hand for base writeback
-    ARMword AbortAddr;        // To keep track of Prefetch aborts
-    ARMword Vector;           // Synthesize aborts in cycle modes
-
     // For differentiating ARM core emulaiton.
     bool is_v4;     // Are we emulating a v4 architecture (or higher)?
     bool is_v5;     // Are we emulating a v5 architecture?
@@ -167,14 +152,6 @@ So, if lateabtSig=1, then it means Late Abort Model(Base Updated Abort Model)
 
     // Added by ksh in 2005-10-1
     cpu_config_t* cpu;
-
-    u32 CurrInstr;
-    u32 last_pc;      // The last PC executed
-    u32 last_instr;   // The last instruction executed
-    u32 WriteAddr[17];
-    u32 WriteData[17];
-    u32 WritePc[17];
-    u32 CurrWrite;
 };
 
 /***************************************************************************\
@@ -260,34 +237,6 @@ enum {
     ARMul_INC       = 3
 };
 
-enum {
-    ARMul_CP13_R0_FIQ       = 0x1,
-    ARMul_CP13_R0_IRQ       = 0x2,
-    ARMul_CP13_R8_PMUS      = 0x1,
-
-    ARMul_CP14_R0_ENABLE    = 0x0001,
-    ARMul_CP14_R0_CLKRST    = 0x0004,
-    ARMul_CP14_R0_CCD       = 0x0008,
-    ARMul_CP14_R0_INTEN0    = 0x0010,
-    ARMul_CP14_R0_INTEN1    = 0x0020,
-    ARMul_CP14_R0_INTEN2    = 0x0040,
-    ARMul_CP14_R0_FLAG0     = 0x0100,
-    ARMul_CP14_R0_FLAG1     = 0x0200,
-    ARMul_CP14_R0_FLAG2     = 0x0400,
-    ARMul_CP14_R10_MOE_IB   = 0x0004,
-    ARMul_CP14_R10_MOE_DB   = 0x0008,
-    ARMul_CP14_R10_MOE_BT   = 0x000c,
-    ARMul_CP15_R1_ENDIAN    = 0x0080,
-    ARMul_CP15_R1_ALIGN     = 0x0002,
-    ARMul_CP15_R5_X         = 0x0400,
-    ARMul_CP15_R5_ST_ALIGN  = 0x0001,
-    ARMul_CP15_R5_IMPRE     = 0x0406,
-    ARMul_CP15_R5_MMU_EXCPT = 0x0400,
-    ARMul_CP15_DBCON_M      = 0x0100,
-    ARMul_CP15_DBCON_E1     = 0x000c,
-    ARMul_CP15_DBCON_E0     = 0x0003
-};
-
 /***************************************************************************\
 *               Definitons of things in the host environment                *
 \***************************************************************************/

src/core/arm/skyeye_common/armemu.h

@@ -38,16 +38,6 @@ enum : u32 {
     INTBITS  = 0x1C0,
 };
 
-// Different ways to start the next instruction.
-enum {
-    SEQ           = 0,
-    NONSEQ        = 1,
-    PCINCEDSEQ    = 2,
-    PCINCEDNONSEQ = 3,
-    PRIMEPIPE     = 4,
-    RESUME        = 8
-};
-
 // Values for Emulate.
 enum {
     STOP       = 0, // Stop
@@ -55,5 +45,3 @@ enum {
     ONCE       = 2, // Execute just one interation
     RUN        = 3  // Continuous execution
 };
-
-#define FLUSHPIPE state->NextInstr |= PRIMEPIPE

src/core/core.h

@@ -21,9 +21,6 @@ struct ThreadContext {
     u32 fpu_registers[32];
     u32 fpscr;
     u32 fpexc;
-
-    // These are not part of native ThreadContext, but needed by emu
-    u32 mode;
 };
 
 extern ARM_Interface*   g_app_core;     ///< ARM11 application core